This error code on the LCD display is the result of a fault detected by the electronics system. The code can help us determine which component is not functioning properly.
The most common codes seen are the following:
- Error 4: Open Throttle Fault. The throttle is blocked from returning to the closed position at startup. You should check to ensure that nobody is touching or interfering with the throttle.
- Error 8 or Error 9: Hall of Phase Cable Fault. The motor may be disconnected.
- Error 30: Communication Error. This error is typically caused by the 1-4 cable becoming loose, damaged, or corroded.
Below is a complete list of all possible faults.
Comments
1 comment
Unbelievable.. waited a frigen month to get my bike, as soon as it got here I sold my car to my good friend because this bike will take the place of my car, took the day off work to sign for my delivery today, spent roughly 9 hours building my bike, taking my time so I don't miss anything, I built my Hyper Scrambler today with 0 miles and I turn it on and I get an error code 8, my bike is 100% inoperable, I unplugged the cable going to the motor with the bike turned off, then turning the bike on and I still get the code, this is my first introduction to Juiced. Not a happy 1st time customer
Please sign in to leave a comment.