This guide will show how to assemble and install your rear fender on the RipCurrent and RipCurrent S.
Here we show how the fender looks mounted. We will review each point
On the top side, behind the seat post (removed for clarity) Install the extension arm in this position (bend pointed to the back)
Be sure that the screw securing the fender just beneath the extension arm is properly tight. You can remove air from the tire for easier access.
The lower extension arms share location with the rear rack mount legs. You can find an example of the rack diagram here.
This is the fender mounted by itself to keep it in position
And here once you add the rear rack (here is an example video of the rear rack install with no fender for guidance)
Going back to the top extension (also described on video) here we see how to attach the slider to the rack
Then we have to secure the fender properly using the included tab
Using a 10mm wrench and a phillips screwdriver you can tighten it up
This is the back view of the Rear LED light
After the install you can adjust it so the tire rotates freely before taking it for a spin
If any doubts please contact our support team fir guidance