* Video at bottom of page *
This is a guide on how to install your front wheel skewer on a CityScrambler
Note: Be sure the washers are installed as illustrated and you've inspected the torque (tightness) before the first ride. All installed items (handlebars, pedals, wheel, etc) need to be securely tightened.
Remember to not use the brake levers until the wheel is installed. And to not touch the disk brake rotors face with your hands or any chemicals.
Please see the orientation is in front of your bike looking at it. So your chain is at your left and the disk brake on your right. You will need a 15mm wrench
This is how the spacers are located. The thicker one on the left side and the slimmer one on the right side ( Disk brake side )
The front fork will slide between the spacer and the washer on each side. This is an example of how it looks on the left side.
And here is the example of how it looks on the right side
Remember to verify all items are tight and torqued properly after your first couple of rides