The Battery Upper Interface is used to lock the battery to the frame and provide a secure electrical connection between the battery and the on-board electronics.
There are 2 types of Battery Upper Interfaces used on Juiced Bikes. You must select the interface that is compatible with your e-bike. The parts are not interchangeable.
- 52V Wide Format - Used on all 52V E-bikes: Store Link
- 48V Narrow Format - Discontinued E-bikes: Store Link
The Battery Upper Interface (Version 3) is the latest revision to the design of the part. This service Kit contains all the parts and tools necessary to perform the following service steps for 52V e-bikes.
- Replace the entire battery upper interface
- Replace the male discharge port
- Replace the discharge cable
- Interface key core replacement
This part/accessory is compatible with the following 52V e-bikes:
- CrossCurrent X
- CrossCurrent S2
- RipCurrent S
- HyperScorpion Express
- HyperScrambler 2
The kit includes an XT60 extension cable that may be required depending on the vehicle model being serviced. The kit contains all the cables necessary for every 52V e-bike model.
Download the Assembly Guide that arrives with this part.
Assembly Overview Video
This video takes you through a quick overview of the installation process.
The following parts are included with this kit.
View the Assembly Diagram for this part.